Usage Keys Action Push-to-talk button in TeamSpeak Direct Speech. Caps Lock To talk on a radio. CTRL + Caps Lock To talk on a long range radio. CTRL + P To open the personal radio interface (the radio must be in the inventory slot). In that case if you have a number of radios - you can select the one needed. It is also possible to set the radio as active (the one that will be used for transmission). Also it is possible to load radio settings from another radio with same encryption code. CTRL + + [/] Cycle through available shortwave radios. CTRL + Up/Left/Right Arrow Rapid switching of shortwave stereo mode. NUM[1-8] Rapid switching of shortwave radio channels. ALT + P To open a long range radio interface (a long range radio must be put on your back, or you should be in a vehicle in a position of a driver, shooter, or pilot assistant). If a number of radios are available – you’ll be offered to choose one. Besides, one of them can be set as active. Also it is possible to load radio settings from another radio with same encryption code. CTRL + ALT + [/] Cycle through available long range radios. ALT + Up/Left/Right Arrow Rapid switching of long range stereo mode. CTRL + NUM[1-9] Rapid switching of long range radio channels. CTRL + TAB To change the direct speech volume. You can talk: Whispering, Normal or Yelling. Does not affect the signal volume in the radio transmission. CTRL + ] Select next personal radio. CTRL + [ Select previous personal radio. CTRL + ALT + ] Select next long range radio. CTRL + ALT + [ Select previous long range radio. CTRL + [←,↑,→] Change personal radio stereo mode. ALT + [←,↑,→] Change long range radio stereo mode. T Transmit on additional channel of personal radio. Y Transmit on additional channel of long range radio. ESC To exit from the radio interface.